Water jet cutter: Difference between revisions

A water jet cutter is a tool capable of slicing into metal or other materials using a jet of water at high velocity and pressure, or a mixture of water and an abrasive substance. The process is essentially the same as water erosion found in nature but accelerated and concentrated by orders of magnitude. It is often used during fabrication or manufacture of parts for machinery and other devices. It has found applications in a diverse number of industries from mining to aerospace where it is used for operations such as cutting, shaping, carving, and reaming.

In the 1950s, forestry engineer Dr. Norman Franz experimented with an early form of water jet cutter to cut lumber. However, the technology didn't advance notably until the 1970s when Dr. Mohamed Hashish created a technique to add abrasives to the waterjet cutter.^[1] Today the water jet is unparallelled in many aspects of cutting and has changed the way many products are manufactured. Many types of water jets exist today, including plain water jets, abrasive water jets, percussive water jets, cavitation jets and hybrid jets.

The cutter is commonly connected to a high-pressure water pump (a local water main does not supply sufficient pressure) where the water is then ejected out of the nozzle, cutting through the material by bombarding it with the stream of high-speed water. Additives in the form of suspended grit or other abrasives, such as garnet and aluminum oxide, can assist in this process. Because the nature of the cutting stream can be easily modified, water jets can be used to cut materials as diverse as fish sticks and titanium. There are few materials that can't be effectively cut with a water jet cutter; one of these is tempered glass which shatters when cut, regardless of the cutting technology used. Certain ceramics are also resistant to water jet cutting. Water jet cuts are not typically limited by the thickness of the material, and are capable of cutting materials over twelve inches thick.

An important benefit of the water jet cutter is the ability to cut material without interfering with the material's inherent structure as there is no "heat affected zone" or HAZ. Minimizing the effects of heat allows metals to be cut without harming or changing intrinsic properties.

Water jet cutters are also capable of producing rather intricate cuts in material. The kerf, or width, of the cut can be changed by changing parts in the nozzle, as well as the type and size of abrasive. Typical abrasive cuts are made with a kerf in the range of 0.04" to 0.05", but can be as narrow as 0.02". Non-abrasive cuts are normally 0.007" to 0.013", but can be as small as 0.003", which is approximately the size of a human hair. These small cutters can make very small detail possible in a wide range of applications.

Commercial water jet cutting systems are available from manufacturers all over the world, in a range of sizes, and with water pumps capable of a range of pressures. Typical water jet cutting machines have a working envelope as small as a few square feet, or up to hundreds of square feet.^{[citation needed]} Ultra-high pressure water pumps are available from as low as 40,000 psi up to 87,000 psi.

• Examples of Waterjet cutting systems [IT]
• A basic guide to abrasive and non-abrasive waterjet cutting
• List of materials that can be cut by water jet
• [1]
• How Water Jets Work, HowStuffWorks.com video
• XBOX water jet cutouts pictures
• All for Waterjet Technology
• Waterjet user
• Water Jet in action at 1:40 (Second Video)

Template:Metalworking - Cutting machines